The OssePro - 190 One Piece Tilt Table with hand Control, ideal for physical therapy purposes, is equipped with 2 motors, hand control, and is controlled by 2 buttons.
The OssePro - 190 electric tilt table is equipped with the following accessories in the package:
All 4 corners of the OssePro - 190 table are supported by a 5” inch castor with Swivel Lock and Brake. The Frame Construction is made with Steel Tubes of (a) 6 * 3cm and (b) 7 * 3cm Dimensions and by the thickness of 2mm.
For absolute safety requirement, the OssePro - 190 is equipped with a “1-PULL EMERGENCY HANDLE” at the back of electric tilt table.
When in an emergency situation where no utility power is available, the emergency handle can be pulled to allow the electric tilt table to be moved back from vertical to horizontal position and the patient can then be unstrapped and transferred to normal patient’s bed.
In any given case of loss of utility power, just pull on the RED EMERGENCY HANDLE at the back of table to disengage the Motorized Actuator (otherwise locked) to allow the patient to be unstrapped and lifted off the tilt table.
